It's been estimated that one in 10 vehicles on the road has an A/C system with contaminated refrigerant. The only way to know for sure if you can safely recover these charges is with a refrigerant identifier. You may also save hundreds of dollars by checking bulk tanks for purity before use.

Robinair's Cool-Tech ID shows you in just seconds if it's safe to recover or recharge the refrigerant. There's no guesswork because a red light indicated "Fail" while a green light is your signal to continue with service. For R-12 and R-134a vehicles.

Fast and Accurate!

Displays test results in less than a minute and passes the refrigerant only if it's 98% pure. To assure consistent, rapid results, the units are not pressure/temperature dependent.

Reliable Technology!

The instrument uses dependable infrared technology developed by Neutronics, Inc., to determine if the refrigerant is an acceptable type and is pure enough to be used.

Unique Case Design!

Puts all the components up front where you can see them at a glance, including the filter. Contoured case can be held in either hand and rubber feet protect the vehicle's finish.

In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges it directly from the tank or system.

1. Displays the actual percentage of R-12, R-134a, R-22 and air in the system or tank.

2. Gives you the option of purging air if a significant concentration is found.

3. Hydrocarbon alarm sounds if flammable substances are sensed.

4. On-board printer port allows you to connect a printer for hard copy of testing results.